Drone Siganl Detector Module FPV DIY Drone Detection Module Anti Drone System
Product Introduction
The drone detection module serves as a drone detection and processing platform for drone detection and recognition. The principle is based on spectrum sensing and artificial intelligence technology to identify and classify the flight control links and image transmission links of unmanned aerial vehicles. It can endow other devices with the ability to detect, recognize, and measure the direction of unmanned aerial vehicles.
Product Feature
· Support DJI, Autel, Harbosen, Lightbridge, enhanced WIFI, Analog FPV, Lora, Modified LTE etc,
· output the detection result and real-time spectrum data.
· All processing on device.
· Frequency Range:70M-6G
· GPIO controlled 8/16 Antenna Direction Finding.
· Detect Range: 1km-10km
· UDP/TCP/ ttl 3.3v with 115200
· 5V, 3.3W.
· 89mm * 55mm * 18mm
Signal Type
| Signal Type | Drone Model |
| DJI_ID | DJI drone ID |
| Lightbridge type1 | DJI P4, Spark |
| Lightbridge type2 | Autel Evo2V2, Feimi |
| eWifi_5M | DJI Mini1,Air1 |
| eWifi_10M | HUBSAN Zino, HUBSAN Eagle, |
| PAL Analog | Analog PAL |
| NTSC Analog | Analog NTSC |
| DJI_OC123 10M | Mini 2,3, 4k, Air 2, 3, Mavic 2,3, Avata, P4-2.0 |
| DJI_OC123 20M | Mini 2,3, 4k,Air 2, 3, Mavic 2,3, Avata, P4-2.0 |
| DJI_O3+ | Mavic 3 series |
| DJI_O4_type | Mini4, Air3s, Avata2, Neo |
| Autel_type1/ Autel_type2/ Autel_type3/ Autel_type4/ Autel_type5/ | Autel nano, nano+, lite, lite+, Evo2_V3, MAX4T, |
| Datalink | P900/P840/Mavlink |
| O3+_ofdm_datalink | DJI and Autel remote control and some datalink |
| LTE_type0 | LTE modfied |
| LORA | RadioMaster , Lora Signal, ExpressLRS,T900 |
| Walksnail | Walksnail, Avatar |
| DJI_O4+ | Mavic 4 pro |
Product Funtion
1. Spectrum Module: Detects the entire frequency band (300-6GHz), with a range of 3km (using an omnidirectional antenna, mounted antenna).
1) Two antenna interfaces on the spectrum module: RX1, RX2
RX1: Primarily for 2.4GHz and 5.8GHz antennas
RX2: Full-band antenna
One possibility is that initially, the RX1 interface will detect the entire frequency band; RX2 can only be activated via command.
A corresponding command needs to be entered to fix the detection frequency band for both RX1 and RX2 interfaces.
2) Two other interfaces on the spectrum module: Power interface, Computer interface
Low-Noise Amplifier (LNA): Primarily used to enhance the detection signal (for 2.4GHz/5.8GHz) -- Optional
Host Computer Software
The file fpvrec.py provides a reference Python implementation for receiving and displaying FPV image data.
The software functions include:
· Establishing TCP connection with the spectrum detection module
· Receiving image data packets
· Parsing image width and height information
· Extracting raw image data
· Displaying decoded FPV video frames
The Python program can be used as a reference example for developing a custom upper computer (PC host) application.
|
|
Drone Siganl Detector Module FPV DIY Drone Detection Module Anti Drone System Images
|
